The following sections provide a list of available advanced attributes available for controlling and customizing Stacked Bar 3D chart elements.
Note: This article contains documentation for advanced attributes which are third-party customizations that must be manually entered into the chart wizard. These articles were converted directly from the documentation provided by this third-party source. Not every attribute listed may be supported in Exago BI as some unexpected conflicts may occur in their integration within the application.
Functional Attributes
These attributes let you control a variety of functional elements on the chart. For example, you can opt to show/hide data labels, data values. You can also set chart limits and extended properties.
| Attribute | Type | Value | Description |
| animation | True/False | 0/1 | This attribute gives you the option to control animation in your charts. If you do not want to animate any part of the chart, set this as 0. |
| animationDuration | Number | In seconds | This attribute sets the animation duration, if `animation` is set to `1`. Default value: 1 sec |
| palette | Number | 1-5 | Exago uses the concept of Color Palettes. Each chart has 5 pre-defined color palettes which you can choose from. Each palette renders the chart in a different color theme. |
| paletteColors | Text | List of hex color codes separated by comma | While the `palette` attribute allows to select a palette theme that applies to chart background, canvas, font and tool-tips, it does not change the colors of data items (i.e., column, line, pie etc.). Using `paletteColors` attribute, you can specify your custom list of hex colors for the data items. The list of colors have to be separated by comma e.g., `"paletteColors": "#FF0000, #0372AB, #FF5904..."`. The chart will cycle through the list of specified colors and then render the data plot accordingly. To use the same set of colors throughout all your charts in a web application, you can store the list of palette colors in your application globally and then provide the same in each chart JSON. |
| showLabels | True/False | 0/1 | It sets the configuration whether the x-axis labels will be displayed or not. |
| labelStep | Number | 1 or above | By default, all the labels are displayed on the chart. However, if you've a set of streaming data (like name of months or days of week), you can opt to show every n-th label for better clarity. This attribute just lets you do so. When a value greater than 1 (n) is set to this attribute, the first label from left and every label at the n-th position from left will be displayed. e.g., a chart showing data for 12 months and set with `labelStep: 3` will show labels for January, April, July, and October. The rest of the labels will be skipped. |
| maxLabelWidthPercent | Number | 1-100 | Restricts the maximum length of data labels in terms of percentage of the charts width that the data labels can occupy. If a data label is longer than the specified percentage width then it will either be wrapped or get truncated, subject to availability of vertical space. Unnecessary space is not reserved for the data labels, in case all of them are shorter than the specified maximum width. |
| minLabelWidthPercent | Number | 1-100 | Restricts the minimum length of data labels in terms of percentage of the chart's width that the data labels can occupy. The space thus calculated stays reserved even if the label width is less than the minimum width. |
| useEllipsesWhenOverflow | True/False | 0/1 | This attribute lets you set whether the overflowing data labels will be truncated by adding ellipses. |
| showValues | True/False | 0/1 | Sets the configuration whether data values will be displayed along with the data plot on chart. |
| maxBarHeight | Number | In Pixels | Sets the maximum allowed bar height. |
| clickURL | Text | Any | The entire chart can now act as a hotspot. Use this URL to define the hotspot link for the chart. The link can be specified in Exago Link format. |
| clickURLOverridesPlotLinks | True/False | 0/1 | Sets whether the `clickURL` attribute (that sets a link to which the user is directed when the chart is clicked) overrides the `link` attribute (that sets a link to which the user is directed when a data plot is clicked). Default value: 0 (`clickURL` does not override `link`) |
| showShadow | True/False | 0/1 | Whether to apply the shadow effects for data plot. |
| adjustDiv | True/False | 0/1 | Exago automatically tries to adjust divisional lines and limit values based on the data provided. However, if you want to set your explicit lower and upper limit values and number of divisional lines, first set this attribute to false. That will disable automatic adjustment of divisional lines. |
| use3DLighting | True/False | 0/1 | Whether to use advanced gradients and shadow effects to create better looking 3D charts. |
| showSum | True/False | 0/1 | Whether to show the sum of each stacked bar along its side. |
| stack100Percent | True/False | 0/1 | Setting this attribute to 1 helps in depicting the values in percentage figures. |
| showPercentValues | True/False | 0/1 | Whether to show percentage figures in data values of the chart. |
| showPercentInToolTip | True/False | 0/1 | Whether to show percentage figures in tool tip. |
| hasRTLText | Number | Any | This attribute, when set to `1`, indicates to the chart that the text (rendered on the chart) may contain RTL characters and the textual display has to be managed accordingly. |
| plotHighlightEffect | Text | Any | This attribute lets you enable/disable the highlight effect, in the form of a `fadeout`, for the data plots corresponding to a legend item. When this attribute is enabled and the mouse pointer is hovered over a legend item label, plots belonging to the other data series fadeout, by reducing their opacity. The fadeout effect can be customized by specifying the fadeout color and opacity using the `color` and `alpha` attributes. Eg. `fadeout|color=#ff0000, alpha=60` |
| showPrintMenuItem | True/False | 0/1 | Whether to show "Print Chart" item in the context menu of the chart? Even if you opt to hide the item in context menu, you can still opt to invoke `print()` JavaScript method of the chart to print the same. |
| theme | Text | ‘carbon’, ‘fint’, ‘ocean’, ‘zune’ | This attribute changes the theme of the chart. There are 4 types of themes which have been made according to the different color combinations. |
Chart Message-related Attributes
These attributes let you set and configure custom chart messages, using text as well as images.
| Attribute | Type | Value | Description |
| baseChartMessageFont | Text | Any | This attribute allows to set a custom font for all chart messages. |
| baseChartMessageFontSize | Number | In pixels | This attribute allows to set a custom font size for all chart messages. |
| baseChartMessageColor | Color | Hex Color Code | This attribute allows to set a custom font color for all chart messages. |
| baseChartMessageImageHAlign | Text | left, middle, right | This attribute allows to set a custom horizontal alignment for all images displayed as chart messages. Default value: middle |
| baseChartMessageImageVAlign | Text | top, middle, bottom | This attribute allows to set a custom vertical alignment for all images displayed as chart messages. Default value: middle |
| baseChartMessageImageAlpha | Number | 0 - 100 | This attribute allows to set a transparency for all images displayed as chart messages. Default value: 100 |
| baseChartMessageImageScale | Number | 0-300 | This attribute allows to set a scale for magnifying all images displayed as chart messages. Default value: 100 |
| loadMessage | Text | Any | This attribute allows to set the message to be displayed when a chart begins to load. To display an image as the chart message, prefix `I-` to the image URL. |
| loadMessageFont | Text | Font Name | This attribute allows to set the font for the message displayed when a chart begins to load. |
| loadMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed when a chart begins to load. |
| loadMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed when a chart begins to load. |
| loadMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `loadMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| loadMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `loadMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| loadMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `loadMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| loadMessageImageScale | Number | 0-300 | If an image is displayed as the chart `loadMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| typeNotSupportedMessage | Text | Any | This attribute allows to set the message to be displayed when the specified chart type is not supported. To display an image as the chart message, prefix `I-` to the image URL. |
| typeNotSupportedMessageFont | Text | Font Name | This attribute allows to set the font for the message displayed when the specified chart type is not supported. |
| typeNotSupportedMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed when the specified chart type is not supported. |
| typeNotSupportedMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed when the specified chart type is not supported. |
| typeNotSupportedMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| typeNotSupportedMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| typeNotSupportedMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| typeNotSupportedMessageImageScale | Number | 0-300 | If an image is displayed as the chart `typeNotSupportedMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| renderErrorMessage | Text | Any | This attribute allows to set the message to be displayed if an error is encountered while rendering the chart. To display an image as the chart message, prefix `I-` to the image URL. |
| renderErrorMessageFont | Text | Font Name | This attribute allows to set a font for the message displayed if an error is encountered while rendering the chart. |
| renderErrorMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed if an error is encountered while rendering the chart. |
| renderErrorMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed if an error is encountered while rendering the chart. |
| renderErrorMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| renderErrorMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| renderErrorMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| renderErrorMessageImageScale | Number | 0-300 | If an image is displayed as the chart `renderErrorMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| dataLoadStartMessage | Text | Any | This attribute allows to set the message to be displayed when chart data begins loading. To display an image as the chart message, prefix `I-` to the image URL. |
| dataLoadStartMessageFont | Text | Font Name | This attribute allows to set a font for the message displayed when chart data begins loading. |
| dataLoadStartMessageFontSize | Text | In pixels | This attribute allows to set the font size for the message displayed when chart data begins loading. |
| dataLoadStartMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed when chart data begins loading. |
| dataLoadStartMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| dataLoadStartMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| dataLoadStartMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| dataLoadStartMessageImageScale | Number | 0-300 | If an image is displayed as the chart `dataLoadStartMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| dataEmptyMessage | Text | Any | This attribute allows to set the message to be displayed if the data loaded for a chart is empty. To display an image as the chart message, prefix `I-` to the image URL. |
| dataEmptyMessageFont | Text | Font Name | This attribute allows to set the font for the message displayed if the data loaded for a chart is empty |
| dataEmptyMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed if the data loaded for a chart is empty. |
| dataEmptyMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed if the data loaded for a chart is empty. |
| dataEmptyMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| dataEmptyMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| dataEmptyMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| dataEmptyMessageImageScale | Number | 0-300 | If an image is displayed as the chart `dataEmptyMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| dataLoadErrorMessage | Text | Any | This attribute allows to set the message to be displayed if an error is encountered while loading chart data. To display an image as the chart message, prefix `I-` to the image URL. |
| dataLoadErrorMessageFont | Text | Font Name | This attribute allows to set a font for the message displayed if an error is encountered while loading chart data. |
| dataLoadErrorMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed if an error is encountered while loading chart data. |
| dataLoadErrorMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed if an error is encountered while loading chart data. |
| dataLoadErrorMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| dataLoadErrorMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| dataLoadErrorMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| dataLoadErrorMessageImageScale | Number | 0-300 | If an image is displayed as the chart `dataLoadErrorMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
| dataInvalidMessage | Text | Any | This attribute allows to set the message to be displayed if the data to be loaded for the chart is invalid. To display an image as the chart message, prefix `I-` to the image URL. |
| dataInvalidMessageFont | Text | Font Name | This attribute allows to set the font for the message displayed if the specified chart data is invalid. |
| dataInvalidMessageFontSize | Number | In pixels | This attribute allows to set the font size for the message displayed if the specified chart data is invalid. |
| dataInvalidMessageColor | Color | Hex Color Code | This attribute allows to set the font color for the message displayed if the specified chart data is invalid. |
| dataInvalidMessageImageHAlign | Text | left, middle, right | If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set a custom horizontal alignment for the image. Default value: value assigned to the `baseChartMessageImageHAlign` attribute |
| dataInvalidMessageImageVAlign | Text | top, middle, bottom | If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set a custom vertical alignment for the image. Default value: value assigned to the `baseChartMessageImageVAlign` attribute |
| dataInvalidMessageImageAlpha | Number | 0 - 100 | If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set the transparency of the image. Default value: 100 |
| dataInvalidMessageImageScale | Number | 0-300 | If an image is displayed as the chart `dataInvalidMessage`, this attribute allows to set the scale for magnifying the image. Default value: 100 |
Chart Titles and Axis Names
Using these attributes, you can set the various headings and titles of chart like caption, sub-caption, x-axis and y-axis names etc.
| Attribute | Type | Value | Description |
| caption | Text | Any | Caption of the chart. |
| subCaption | Text | Any | Sub-caption of the chart. |
| xAxisName | Text | Any | X-axis title of the chart. |
| yAxisName | Text | Any | Y-axis title of the chart. |
Chart Caption Cosmetics
These attributes let you configure the cosmetics of chart caption and sub-caption.
| Attribute | Type | Value | Description |
| captionAlignment | Text | "left", "center", "right" | Sets horizontal alignment of caption |
| captionOnTop | True/False | 0/1 | Whether caption should be on top of the data plot area |
| captionFontSize | Number | 6 - 72 | Sets the caption font size in pixels |
| subCaptionFontSize | Number | 6 - 72 | Sets the sub-caption font size (in pixels) |
| captionFont | Text | Font Name | Sets the caption font family |
| subCaptionFont | Text | Font Name | Sets the sub-caption font family |
| captionFontColor | Color | Hex Color Code | Sets the caption font color |
| subCaptionFontColor | Color | Hex Color Code | Sets the sub-caption font color |
| captionFontBold | True/False | 0/1 | Whether the caption font should be displayed in bold |
| subCaptionFontBold | True/False | 0/1 | Whether the sub caption font should be displayed in bold |
| alignCaptionWithCanvas | True/False | 0/1 | Whether the caption is aligned with the canvas. Else, it will be aligned with the entire chart area |
| captionHorizontalPadding | Number | In Pixels | If caption is not centre aligned, lets you configure the padding (in pixels) from either edge. Will be ignored if caption is centre aligned. |
Chart Axis Configuration Attributes
Using these attributes, you can set and configure x-axis labels, y-axis values and set chart cosmetics for the axis like color, alpha, etc.
| Attribute | Type | Value | Description |
| showXAxisLine | True/False | 0/1 | This attribute if set to _0_, hides the x-axis of the chart. Default value: 1 |
| xAxisLineColor | Color | Hex Color Code | Sets color of the x-axis of the chart. |
| rotateXAxisName | True/False | 0/1 | If you do not wish to rotate x-axis name, set this as 0. It specifically comes to use when you've special characters (UTF8) in your x-axis name that do not show up in rotated mode. |
| xAxisNameWidth | Number | (In Pixels) | If you opt to not rotate x-axis name, you can choose a maximum width that will be applied to x-axis name. |
| centerXaxisName | True/False | 0/1 | This attribute when set to '1', allows you to align the x-axis name with respect to the height of the chart. When set to '0', the x-axis name is aligned with respect to the height of the canvas. |
| showYAxisValues | True/False | 0/1 | Exago y-axis is divided into vertical sections using div (divisional) lines. Each div line assumes a value based on its position. Using this attribute you can set whether to show those div line (y-axis) values or not. This attribute shows or hides the y-axis divisional lines and limits. The values of `showLimits` and `showDivLineValues`, if specified explicitly, overrides the value of this attribute. |
| yAxisValuesStep | Number | 1 or above | By default, all div lines show their values. However, you can opt to display every x(th) div line value using this attribute. |
| yAxisMinValue | Number | Numeric Value | This attribute helps you explicitly set the lower limit of the chart. If you don't specify this value, it is automatically calculated by Exago based on the data provided by you. |
| yAxisMaxValue | Number | Numeric Value | This attribute helps you explicitly set the upper limit of the chart. If you don't specify this value, it is automatically calculated by Exago based on the data provided by you. |
| forceYAxisValueDecimals | True/False | 0/1 | Whether to forcefully attach decimal places to all y-axis values. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all y-axis numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all y-axis numbers, set this attribute to 1. |
| yAxisValueDecimals | Number | 0-10 | If you've opted to not adjust div lines, you can specify the div line values decimal precision using this attribute. |
x-Axis Name Cosmetics
To configure the font cosmetics of x-axis name (title), you can use the following attributes.
| Attribute | Type | Value | Description |
| xAxisNameFontColor | Color | Hex Color Code | Sets the x-axis font color |
| xAxisNameFontSize | Number | 6 - 72 | Specifies the x-axis font size |
| xAxisNameFontBold | True/False | 0/1 | Whether x-axis font should be bold |
| xAxisNameFontItalic | True/False | 0/1 | Whether x-axis font should be italicized |
| xAxisNameBgColor | Color | Hex Color Code | Sets the background color for x-axis text |
| xAxisNameBorderColor | Color | Hex Color Code | Sets the border around the x-axis text |
| xAxisNameAlpha | Number | 0 - 100 | Sets the x-axis alpha including font and background |
| xAxisNameFontAlpha | Number | 0 - 100 | Sets the x-axis font alpha |
| xAxisNameBgAlpha | Number | 0 - 100 | Sets the x-axis background alpha |
| xAxisNameBorderAlpha | Number | 0 - 100 | Sets the x-axis border alpha |
| xAxisNameBorderPadding | Number | In Pixels | Sets the x-axis border padding |
| xAxisNameBorderRadius | Number | In Pixels | Sets the x-axis border radius |
| xAxisNameBorderThickness | Number | In Pixels | Sets the x-axis border thickness |
| xAxisNameBorderDashed | True/False | 0/1 | Whether the border around the x-axis name should be rendered using dashed lines. Default value: 0 (border rendered using straight lines) |
| xAxisNameBorderDashLen | Number | In pixels | Sets the length of each dash when the border around the x-axis name is rendered using dashed lines. |
| xAxisNameBorderDashGap | Number | In pixels | Sets the gap between consecutive dashes when the border around the x-axis name is rendered using dashed lines. |
y-Axis Name Cosmetics
To configure the font cosmetics of y-axis name (title), you can use the following attributes.
| Attribute | Type | Value | Description |
| yAxisNameFont | Text | Font Name | Sets the y-axis (primary / secondary) font family for the text |
| yAxisNameFontColor | Color | Hex Color Code | Sets the y-axis (primary / secondary) font color |
| yAxisNameFontSize | Number | 6 - 72 | Specifies the y-axis (primary / secondary) font size |
| yAxisNameFontBold | True/False | 0/1 | Whether y-axis (primary / secondary) font should be bold |
| yAxisNameFontItalic | True/False | 0/1 | Whether y-axis (primary / secondary) font should be italicized |
| yAxisNameBgColor | Color | Hex Color Code | Sets the background color for y-axis (primary / secondary) text |
| yAxisNameBorderColor | Color | Hex Color Code | Sets the border around the y-axis (primary / secondary) text |
| yAxisNameAlpha | Number | 0 - 100 | Sets the y-axis (primary / secondary) alpha including font and background |
| yAxisNameFontAlpha | Number | 0 - 100 | Sets the y-axis (primary / secondary) font alpha |
| yAxisNameBgAlpha | Number | 0 - 100 | Sets the y-axis (primary / secondary) background alpha |
| yAxisNameBorderAlpha | Number | 0 - 100 | Sets the y-axis (primary / secondary) border alpha |
| yAxisNameBorderPadding | Number | In Pixels | Sets the y-axis (primary / secondary) border padding |
| yAxisNameBorderRadius | Number | In Pixels | Sets the y-axis (primary / secondary) border radius |
| yAxisNameBorderThickness | Number | In Pixels | Sets the y-axis (primary / secondary) border thickness |
| yAxisNameBorderDashed | True/False | 0/1 | Whether the border around the y-axis name should be rendered using dashed lines. Default value: 0 (border rendered using straight lines) |
| yAxisNameBorderDashLen | Number | In pixels | Sets the length of each dash when the border around the y-axis name is rendered using dashed lines. |
| yAxisNameBorderDashGap | Number | In pixels | Sets the gap between two consecutive dashes when the border around the y-axis name is rendered using dashed lines. |
Chart Cosmetics
The following attributes let you configure chart cosmetics like background color, background alpha, canvas color & alpha etc.
| Attribute | Type | Value | Description |
| showBorder | True/False | 0/1 | Whether to show a border around the chart or not. |
| borderColor | Color | Hex Color Code | Border color of the chart. |
| borderThickness | Number | In Pixels | Border thickness of the chart. |
| borderAlpha | Number | 0 - 100 | Border alpha of the chart. |
| bgColor | Color | Hex Color Code | This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. To specify a gradient as background color, separate the hex color codes of each color in the gradient using comma. Example: `#FF5904, #FFFFFF`. |
| bgAlpha | Number | 0 - 100 | Sets the alpha (transparency) for the background. If you've opted for gradient background, you need to set a list of alpha(s) separated by comma. |
| bgRatio | Number | 0 - 100 | If you've opted for a gradient background, this attribute lets you set the ratio of each color constituent. |
| bgAngle | Number | 0-360 | Sets the angle of the background color, in case of a gradient. |
| bgImage | Text | Any | To place any image (JPG/PNG/GIF) as background of the chart, enter the (path and) name of the background image as a URL without quotes around it. It should be in the same domain as the chart. |
| bgImageAlpha | Number | 0 - 100 | This attribute specifies the opacity for the loaded background image. |
| bgImageDisplayMode | Text | stretch, tile, fit, fill, center, none | Helps you specify the mode in which the background image is to be displayed. Stretch - expands the image to fit the entire chart area, without maintaining original image constraints. Tile - the image is repeated as a pattern on the entire chart area. Fit - fits the image proportionately on the chart area. Fill -proportionately fills the entire chart area with the image. Center - the image is positioned at the center of the chart area. None - Default mode. |
| bgImageVAlign | Text | top, middle, bottom | Helps you to vertically align the background image. |
| bgImageHAlign | Text | left, middle, right | Helps you to horizontally align the background image. |
| bgImageScale | Number | 0-300 | Helps you magnify the background image.This attribute will only work when the attribute `bgImageDisplayMode` is set to none, center, or tile. |
| canvasBgColor | Color | Hex Color Code | Sets Canvas background color. |
| canvasBgAlpha | Number | 0 - 100 | Sets alpha for Canvas Background. |
| canvasBaseColor | Color | Hex Color Code | Helps you specify the color for canvas base. |
| showCanvasBg | True/False | 0/1 | Whether to show canvas background. |
| showCanvasBase | True/False | 0/1 | Whether to show canvas base. |
| canvasBaseDepth | Number | In Pixels | Height of canvas base (in pixels) |
| canvasBgDepth | Number | In Pixels | Depth of Canvas Background |
| showVLineLabelBorder | True/False | 0/1 | If you've opted to show a label for any of your vLines in the chart, you can collectively configure whether to show border for all such labels using this attribute. If you want to show label border for just a particular vLine, you can over-ride this value by specifying border configuration for that specific vLine. |
| rotateVLineLabels | True/False | 0/1 | This attribute lets you set whether the vline labels will show up as rotated labels on the chart. Default value: 0 |
| logoURL | Text | URL | You can load an external logo (JPEG/PNG) to your chart, this attribute lets you specify the URL. Due to cross domain security restrictions it is advised to use a logo from the same domain name as your charts. |
| logoLeftMargin | Number | In Pixels | This attribute helps you set the amount of empty space that you want to put on the left side of your logo image. Nothing is rendered in this space. |
| logoTopMargin | Number | In Pixels | This attribute helps you set the amount of empty space that you want to put on top of your logo image. Nothing is rendered in this space. |
| logoPosition | Text | TL, TR, BL, BR, CC | Where to position the logo on the chart: TL - Top-left TR - Top-right BR - Bottom right BL - Bottom left CC - Center of screen |
| logoAlpha | Number | 0 - 100 | Once the logo has loaded on the chart, you can configure its opacity using this attribute. |
| logoScale | Number | 0-300 | You can also change the scale of an externally loaded logo at run-time by specifying a value for this parameter. |
| logoLink | Text | URL | If you want to link the logo to an external URL, specify the link in this attribute. The link can be in Exago Link format, allowing you to link to new windows, pop-ups, frames etc. |
Data Plot Cosmetics
These attributes let you configure how your plot (columns, lines, area, pie or any data that you're plotting) will appear on the chart. If the plots can show borders, you can control the border properties using the attributes listed below. Or, if they support gradient fills, you can again configure various properties of the gradient using these attributes. Various other controls over plot cosmetics can be attained using this set of attributes.
| Attribute | Type | Value | Description |
| overlapBars | True/False | 0/1 | Whether to overlap bars over each other to give a richer 3D look. If there are too many bars on the chart, it will automatically overlap. |
| showPlotBorder | True/False | 0/1 | Whether the column, area, pie etc. border will show up. |
| plotBorderColor | Color | Hex Color Code | Color for column, area, pie border |
| plotBorderAlpha | Number | 0 - 100 | Alpha for column, area, pie border |
| plotFillAlpha | Number | 0 - 100 | If you've opted to fill the plot (column, area etc.) as gradient, this attribute lets you set the fill alpha for gradient. |
Data Value Cosmetics
These attributes let you configure font, background and border cosmetics, of value text-field that appear for each data plot.
| Attribute | Type | Value | Description |
| valueFont | Text | Font Name | Sets the font of the values in the chart |
| valueFontColor | Color | Hex Color Code | Specifies the value font color |
| valueFontSize | Number | 6 - 72 | Specifies the value font size |
| valueFontBold | True/False | 0/1 | Whether value font should be bold |
| valueFontItalic | True/False | 0/1 | Whether value font should be italicized |
| valueBgColor | Color | Hex Color Code | Sets the background color for value text |
| valueBorderColor | Color | Hex Color Code | Sets the border color around the value text |
| valueAlpha | Number | 0 - 100 | Sets the value alpha including font and background |
| valueFontAlpha | Number | 0 - 100 | Sets the value font alpha |
| valueBgAlpha | Number | 0 - 100 | Sets the value background alpha |
| valueBorderAlpha | Number | 0 - 100 | Sets the value border alpha |
| valueBorderThickness | Number | In Pixels | Sets the value border thickness |
| valueBorderPadding | Number | In Pixels | Sets the padding between the value and its surrounding border |
| valueBorderRadius | Number | In Pixels | Sets the value border radius |
| valueBorderDashed | True/False | 0/1 | Whether the border around the data values should be rendered using dashed lines. Default value: 0 (border rendered using straight lines) |
| valueBorderDashLen | Number | In pixels | Sets the length of each dash when the border around the data values is rendered using dashed lines. |
| valueBorderDashGap | Number | In pixels | Sets the gap between two consecutive dashes when the border around the data values is rendered using dashed lines. |
Divisional Lines & Grids
Using this set of attributes, you can control the properties of divisional lines, zero plane and alternate color bands. Divisional Lines are horizontal or vertical lines running through the canvas. Each divisional line signifies a smaller unit of the entire axis thus aiding the users in interpreting the chart. The zero plane is a 2D/3D plane that signifies the 0 position on the chart. If there are no negative numbers on the chart, you won't see a visible zero plane. Alternate color bands are colored blocks between two successive divisional lines.
| Attribute | Type | Value | Description |
| numDivLines | Number | Numeric value > 0 | Number of vertical axis division lines that you want on the chart. |
| divLineColor | Color | Hex Color Code | Color for divisional lines. |
| divLineThickness | Number | 1-5 | Thickness of divisional lines. |
| divLineAlpha | Number | 0 - 100 | Alpha of divisional lines. |
| divLineDashed | True/False | 0/1 | Whether the divisional lines should be rendered as dashed lines. Default value: 0 (divisional lines rendered using straight lines) |
| divLineDashLen | Number | In pixels | Sets the length of each dash when divisional lines are rendered as dashed lines. |
| divLineDashGap | Number | In pixels | Sets the gap between two consecutive dashes when divisional lines are rendered as dashed lines. |
| zeroPlaneColor | Color | Hex Color Code | Color for the Zero Plane. Zero Plane is the line/plane that appears at position 0 on the y-axis, when negative data is being shown on the chart. |
| zeroPlaneAlpha | Number | 0 - 100 | Alpha of zero plane. |
| showZeroPlaneValue | True/False | 0/1 | Allows you to show or hide the value on which the zero plane exists on the y-axis. By default, the value is displayed. |
| zeroPlaneShowBorder | True/False | 0/1 | Whether to show border of zero plane. |
| zeroPlaneBorderColor | Color | Hex Color Code | Sets the border color of zero plane. |
Legend Properties
In stacked charts, the series name of each dataset shows up in the legend of the chart. If you do not need the legend, you can opt to hide the same. Also, the legend can be placed at the bottom of the chart or to the right of the chart. Using the attributes below, you can configure the functional and cosmetic properties of the legend.
| Attribute | Type | Value | Description |
| showLegend | True/False | 0/1 | Whether to show legend on the chart. |
| legendItemFontBold | True/False | 0/1 | Whether legend keys should be displayed in bold |
| legendItemFont | Text | Font Name | Sets legend item font |
| legendItemFontSize | Number | 6 - 72 | Sets legend item font size |
| legendItemFontColor | Color | Hex Color Code | Sets legend item font color |
| legendItemHoverFontColor | Color | Hex Color Code | Sets legend item font color on hover |
| legendPosition | Text | BOTTOM or RIGHT | The legend can be plotted at two positions on the chart - below (BOTTOM) the chart and to the right (RIGHT) of the chart. |
| legendCaptionAlignment | Text | "left", "center", "right" | Sets the legend caption horizontal alignment . |
| legendCaptionFontBold | True/False | 0/1 | Whether legend caption should be displayed in bold |
| legendCaptionFont | Text | Font Name | Sets legend caption font |
| legendCaptionFontSize | Number | 6 - 72 | Sets legend caption font size |
| legendCaptionFontColor | Color | Hex Color Code | Sets legend caption font color |
| legendCaption | Text | You can add a caption for the entire legend by setting the same here. | |
| legendItemHiddenColor | Color | Hex Color Code | Sets the color that applies on both text font and icon when they are in a disabled / hidden state |
| legendIconScale | Number | 1-5 | Scaling of legend icon is possible in Exago. This attribute lets you control the size of legend icon. |
| legendBgColor | Color | Hex Color Code | Background color for the legend. |
| legendBgAlpha | Number | 0 - 100 | Background alpha for the legend. |
| legendBorderColor | Color | Hex Color Code | Border Color for the legend. |
| legendBorderThickness | Number | In Pixels | Border thickness for the legend. |
| legendBorderAlpha | Number | 0 - 100 | Border alpha for the legend. |
| legendShadow | True/False | 0/1 | Whether to show a shadow for legend. |
| legendAllowDrag | True/False | 0/1 | The legend can be made drag-able by setting this attribute to 1. End viewers of the chart can drag the legend around on the chart. |
| legendScrollBgColor | Color | Hex Color Code | If you've too many items on the legend, a scroll bar shows up on the same. This attribute lets you configure the background color of the scroll bar. |
| reverseLegend | True/False | 0/1 | In a stacked chart, you can reverse the ordering of datasets in the legend by setting this attribute to 1. |
| interactiveLegend | True/False | 0/1 | This attribute lets you interact with the legend in your chart. When you click a legend key, the dataplots associated with that series are eliminated from the chart. Re-clicking the key causes the dataplots to reappear. |
| legendNumColumns | Number | Positive Integer | If your chart contains multiple series, the legend is displayed as a grid comprising of multiple legend keys. With the help of this attribute you can specify the number of columns that are to be displayed in the legend. |
| minimiseWrappingInLegend | True/False | 0/1 | Whether to minimize legend item text wrapping. |
| drawCustomLegendIcon | True/False | 0/1 | Specifies whether drawing a custom legend icon will be enabled. All legend icon customization attributes will work only if this feature is enabled. Default value: 0 (disabled) |
| legendIconBorderColor | Color | Hex Color Code | Sets the border color for the legend icon. Default value: Data plot border color |
| legendIconBgColor | Color | Hex Color Code | Sets the background color for the legend icon. Default value: Data plot fill color |
| legendIconAlpha | Number | 0 - 100 | Sets the legend icon transparency. Default value: 100 |
| legendIconBgAlpha | Number | 0 - 100 | Sets the legend icon background transparency. Default value: 100 |
| legendIconSides | Number | Any | Sets the number of sides for the legend icon. Default value: 4 |
| legendIconBorderThickness | Number | 1-5 | Sets the thickness of the legend icon border. Default value: 1 |
| legendIconStartAngle | Number | Any | Sets the starting angle of for drawing the legend icon. Default value: 45 |
| alignLegendWithCanvas | True/False | 0/1 | This attribute if set to `0`, the legend box will be center aligned with respect to the entire width of the chart only if the total width of the legend box is more than the canvas width. By default, the legend box is center aligned with respect to the canvas width and it remains the same if the width of the legend box is less than the canvas width. |
Number Formatting
Exago offers you a lot of options to format your numbers on the chart. Using the attributes below, you can control a myriad of options like: Formatting of commas and decimals Number prefixes and suffixes Decimal places to which the numbers will round to Scaling of numbers based on a user defined scale Custom number input formats
| Attribute | Type | Value | Description |
| formatNumber | True/False | 0/1 | This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if 'formatNumber': '1'; and 40000 if 'formatNumber': '0';. |
| formatNumberScale | True/False | 0/1 | Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if `formatNumberScale` is set to 1, 10434 will become 1.04K (with decimalPrecision set to 2 places). Same with numbers in millions - an M will be added at the end. |
| defaultNumberScale | Text | Any | The default unit of the numbers that you're providing to the chart. |
| numberScaleUnit | Text | Any | Unit of each block of the scale. |
| numberScaleValue | Text | Any | Range of the various blocks that constitute the scale. |
| forceNumberScale | True/False | 0/1 | If a data value is less than the lowest given number is the number scale, this attribute forces the lower value of the `numberScaleUnit` to be applied to that data value. This attribute works only when `“formatNumberScale”: “1”` and the `defaultNumberScale` attribute is not defined. For example, if `“numberScaleUnit”: “K, M”`, `“numberScaleValue”: “1000, 1000”`, and `“forceNumberScale”: “1”`, a data value of `400` will be rendered as `0.40K`. |
| scaleRecursively | True/False | 0/1 | Whether recursive scaling should be applied. |
| maxScaleRecursion | Number | Any | How many recursions to complete during recursive scaling? -1 completes the entire set of recursion. |
| scaleSeparator | Text | Any | What character to use to separate the scales that are generated after recursion? |
| numberPrefix | Text | Character | Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to $ to show like $40000, $50000. |
| numberSuffix | Text | Character | Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all figures quantified as per annum on the chart, you could specify this attribute to '/a' to show like 40000/a, 50000/a. |
| decimalSeparator | Text | Character | This attribute helps you specify the character to be used as the decimal separator in a number. |
| thousandSeparator | Text | Character | This attribute helps you specify the character to be used as the thousands separator in a number. |
| thousandSeparatorPosition | Number | This option helps you specify the position of the thousand separator. | |
| inDecimalSeparator | Text | Character | In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, Exago accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the decimal separator. |
| inThousandSeparator | Text | Character | In some countries, commas are used as decimal separators and dots as thousand separators. In XML, if you specify such values, it will give an error while converting to number. So, Exago accepts the input decimal and thousand separator from user, so that it can convert it accordingly into the required format. This attribute lets you input the thousand separator. |
| decimals | Number | 0-10 | Number of decimal places to which all numbers on the chart will be rounded to. |
| forceDecimals | True/False | 0/1 | Whether to add 0 padding at the end of decimal numbers. For example, If you limit the maximum number of decimal digits to 2, a number like 55.345 will be rounded to 55.34. This does not mean that all numbers will be displayed with a fixed number of decimal places. For instance 55 will not be displayed as 55.00 and 55.1 will not become 55.10. In order to have fixed number of decimal places attached to all the numbers, set this attribute to 1. |
Font Properties
Using the attributes below, you can define the generic font properties for all the text on the chart. These attributes allow you a high level control over font properties. If you intend to specify font properties for individual chart elements (like Caption, sub-caption etc.), you'll need to use the Styles feature of Exago. Using Styles, you can also specify advanced font properties like Bold, Italics, HTML Mode etc.
| Attribute | Type | Value | Description |
| baseFont | Text | Font Name | This attribute lets you set the font face (family) of all the text (data labels, values etc.) on chart. If you specify the `outCnvBaseFont` attribute also, then this attribute controls only the font face of text within the chart canvas bounds. |
| baseFontSize | Number | 6 - 72 | This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here. |
| baseFontColor | Color | Hex Color Code | This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here. |
| outCnvBaseFont | Text | Font Name | This attribute sets the base font family of the chart text which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here. |
| outCnvBaseFontSize | Number | 6 - 72 | This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here. |
| outCnvBaseFontColor | Color | Hex Color Code | This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here. |
Tool-tip
These attributes let you control the tool tip. You can set the background color, border color, separator character and few other details.
| Attribute | Type | Value | Description |
| showToolTip | True/False | 0/1 | Whether to show tool tip on chart. |
| toolTipBgColor | Color | Hex Color Code | Background color for tool tip. |
| toolTipColor | Color | Hex Color Code | Font color for the tool-tip. |
| toolTipBorderColor | Color | Hex Color Code | Border color for tool tip. |
| tooltipBorderAlpha | NUmber | 0 - 100 | Sets the border transparency for tool tip. |
| toolTipSepChar | Text | Any | The character specified as the value of this attribute separates the name and value displayed in tool tip. |
| seriesNameInToolTip | True/False | 0/1 | For stacked charts, Exago shows the following information in tool tip (unless tool text is explicitly defined): "Series Name, Category Name, Data Value". This attribute lets you control whether series name will show up in tool tip or not. |
| showToolTipShadow | True/False | 0/1 | Whether to show shadow for tool-tips on the chart. |
Attributes for Exporting Charts
These attributes allow you to control the saving of chart as image, SVG or XLS.
| Attribute | Type | Value | Description |
| exportEnabled | True/False | 0/1 | Whether the chart will allow exporting to images, PDFs, SVG or XLS. Default value: 0 |
| exportAction | Text | 'save' or 'download' | In case of server-side exporting, the action specifies whether the exported image will be sent back to client as download, or whether it'll be saved on the server. Default value: download |
| exportHandler | Text | Any | In case of server side exporting, this refers to the path of the server-side export handler (the ready-to-use scripts that we provide). |
| exportFormats | Text | Any | Lets you configure what output formats to allow for export of chart, in the export context menu, and also customize the label for each menu item. The attribute value should be a pipe (|) delimited separated key-value pair. Example: `exportFormats: 'PNG=Export as High Quality Image|JPG|PDF=Export as PDF File'` |
| exportAtClientSide | True/False | 0/1 | This attribute when set to `1`, enables the client-side export feature. Default value: 0 |
| exportShowMenuItem | True/False | 0/1 | Whether the menu items related to export (e.g., Save as JPEG etc.) will appear in the context menu of chart. |
| exportTargetWindow | Text | '_self' or '_blank' | In case of server-side exporting and when using download as action, this lefts you configure whether the return image, PDF, SVG or XLS will open in same window (as an attachment for download), or whether it will open in a new window. Default value: _self |
| exportFileName | Text | Any | Using this attribute you can specify the name (excluding the extension) of the output (export) file. |
Data Plot Hover Effects
If you wish to show an effect on the data plot (column, line anchor, pie etc.) when the user hovers his mouse over the data plot, these attributes let you configure the cosmetics of the hover for all data plots in the chart.
| Attribute | Type | Value | Description |
| showHoverEffect | True/False | 0/1 | Whether to enable hover effect on charts for all elements |
| plotHoverEffect | True/False | 0/1 | Whether to enable hover effect on charts for data plots (e.g., column, pie) only |
| plotFillHoverColor | Color | Hex Color Code | Specifies the hover color for the data plots |
| plotFillHoverAlpha | Number | 1 - 100 | Specifies the hover alpha for data plots |
| barHoverColor | Color | Hex Color Code | This attribute specifies the hover color for the bars. |
| barHoverAlpha | Number | 1 - 100 | This attribute specifies the transparency of the bar when you hover. |
| plotBorderHoverColor | Color | Hex Color Code | Sets the color of the border of plot when hovered. |
| plotBorderHoverThickness | Number | In Pixels | Sets the thickness of the border of plot when hovered. |
Chart Padding & Margins
The following attributes help you control chart margins and paddings. Exago allows you to manually customize the padding of various elements on the chart to allow advanced manipulation and control over chart visualization. Padding in Exago is always defined in pixels, unless the attribute itself suggests some other scale (like `plotSpacePercent`, which configures the spacing using percentage values). You can also define the chart margins. Chart Margins refer to the empty space left on the top, bottom, left and right of the chart. That means, Exago will not plot anything in that space. It's not necessary for you to specify any padding/margin values. Exago automatically assumes the best values for the same, if you do not specify the same.
| Attribute | Type | Value | Description |
| captionPadding | Number | In Pixels | This attribute lets you control the space (in pixels) between the sub-caption and top of the chart canvas. If the sub-caption is not defined, it controls the space between caption and top of chart canvas. If neither caption, nor sub-caption is defined, this padding does not come into play. |
| xAxisNamePadding | Number | In Pixels | Using this, you can set the distance between x-axis title and canvas end. |
| yAxisNamePadding | Number | In Pixels | Using this, you can set the distance between the y-axis title and y-axis values. |
| yAxisValuesPadding | Number | In Pixels | This attribute helps you set the vertical space between the canvas bottom edge and the y-axis values. This is particularly useful, when you want more space between your canvas and y-axis values. |
| labelPadding | Number | In Pixels | This attribute sets the horizontal space between the labels and canvas left edge. If you want more space between the canvas and the x-axis labels, you can use this attribute to control it. |
| plotSpacePercent | Number | 0-80 (In Percent) | On a column chart, there is spacing defined between two columns. By default, the spacing is set to 20% of canvas width. If you intend to increase or decrease the spacing between columns, you can do so using this attribute. For example, if you wanted all columns to stick to each other without any space in between, you can set `plotSpacePercent` to 0. Similarly, if you want very thin columns, you can set `plotSpacePercent` to its max value of 80. |
| chartLeftMargin | Number | In Pixels | Amount of empty space that you want to put on the left side of your chart. Nothing is rendered in this space. |
| chartRightMargin | Number | In Pixels | Amount of empty space that you want to put on the right side of your chart. Nothing is rendered in this space. |
| chartTopMargin | Number | In Pixels | Amount of empty space that you want to put on the top of your chart. Nothing is rendered in this space. |
| chartBottomMargin | Number | In Pixels | Amount of empty space that you want to put at the bottom of your chart. Nothing is rendered in this space. |
| canvasPadding | Number | In Pixels | Allows you to set empty space on the top and bottom side of bars on the chart canvas |
| legendPadding | Number | In Pixels | Padding of legend from right/bottom side of canvas |
| canvasLeftMargin | Number | In Pixels | This attribute lets you control the space between the start of chart canvas and the start (x) of chart. In case of 2D charts, the canvas is the visible rectangular box. In case of 3D charts, the canvas box is the imaginary box around the 3D canvas. Using this attribute, you can control the amount of empty space between the chart left side and canvas left side. By default, Exago automatically calculates this space depending on the elements to be placed on the chart. However, if you want to over-ride this value with a higher value, you can use this attribute to specify the same. Please note that you cannot specify a margin lower than what has been calculated by the chart. This attribute is particularly useful, when you've multiple charts placed in a page and want all their canvas start position to align with each other - so in such a case, you can set same margin value (a value large enough that it doesn't get rejected by chart owing to it being lower than the calculated value) for all such charts in the page. |
| canvasRightMargin | Number | In Pixels | Like `canvasLeftMargin`, this attribute lets you set the space between end of canvas and end of chart. |
| canvasTopMargin | Number | In Pixels | Like `canvasLeftMargin`, this attribute lets you set the space between top of canvas and top of chart. |
| canvasBottomMargin | Number | In Pixels | Like `canvasLeftMargin`, this attribute lets you set the space between bottom of canvas and bottom of chart. |
The categories Object
The `categories` object and the `category` object (child of the `categories` object) are used to specify x-axis labels for multi-series charts. The attributes of the `categories` object are used to set the font properties of all x-axis labels collectively.
| Attribute | Type | Value | Description |
| font | Text | Valid font face | Lets you specify font face for the x-axis data labels. |
| fontColor | Color | Hex Color Code | Lets you specify font color for the x-axis data labels. |
| fontSize | Number | Any | Lets you specify font size for the x-axis data labels. |
The category Object
The attributes of the `category` object are used to define and customize individual x-axis labels for multi-series charts.
| Attribute | Type | Value | Description |
| label | Text | Any | This attribute determines the label for the data item. The label appears on the x-axis of chart. Note: The `label` attribute replaces the `name` attribute. Previously, either one of the attributes could be used to set the label. Support for the `name` attribute has been discontinued since v3.10.0. |
| showLabel | True/False | 0/1 | You can individually opt to show/hide labels of individual data items using this attribute. |
| toolText | Text | Any | The tooltip defined in the `category` object appears only when the mouse cursor is hovered over the data plots. However, this will not appear when the cursor is moved over the data labels (except for a situation when long labels are automatically truncated with ellipses. In this situation, if the mouse cursor is hovered over a truncated label, the tooltip will appear with the full label). In case you want to set a short label and show the full label in tooltip, define the full label using this attribute within the `category` object. The tooltip with the full label will appear only when the mouse is hovered on the dataplot. |
| font | Text | Any | Sets the x-axis label font family for the text. |
| fontColor | Color | Hex Color Code | Sets the x-axis label font color. |
| fontSize | Number | 6 - 72 | Specifies the x-axis label font size. |
| fontBold | True/False | 0/1 | Flag indicating whether x-axis label font should be bold or not. |
| fontItalic | True/False | 0/1 | Flag indicating whether x-axis label font should be italicized or not. |
| bgColor | Color | Hex Color Code | Sets the background color for x-axis label text. |
| borderColor | Color | Hex Color Code | Sets the color of the border around the x-axis label text. |
| alpha | Number | 0 - 100 | Sets the x-axis label alpha for both font and background. |
| bgAlpha | Number | 0 - 100 | Sets the x-axis label background alpha. |
| borderAlpha | Number | 0 - 100 | Sets the x-axis label border alpha. |
| borderPadding | Number | In Pixels | Sets the x-axis label border padding. |
| borderRadius | Number | In Pixels | Sets the x-axis label border radius. |
| borderThickness | Number | In Pixels | Sets the x-axis label border thickness. |
| borderDashed | True/False | 0/1 | Whether the border around x-axis label should be rendered using dashed lines. Default value: 0 (border rendered using straight lines) |
| borderDashLen | Number | In pixels | Sets the length of each dash when the border around the x-axis label is rendered using dashed lines. |
| borderDashGap | Number | In pixels | Sets the gap between two consecutive dashes when the border around x-axis label is rendered using dashed lines. |
Vertical Data Separator Lines
Vertical data separator lines help you separate data blocks. These lines run through the height of the chart, thereby segregating the data into two different blocks. Vertical lines are defined as shown in the example below:
"categories": [{
"category": [{
"label": "Grade 1",
},
{
"vLine": "true",
"label": "Appraisal"
}]
}]
You can configure the cosmetics of vertical separator lines using the following attributes:
| Attribute | Type | Value | Description |
| vLine | Text | Any | Set this attribute to `true` to render a vertical data separator line. |
| color | Color | Hex Color Code | This attribute defines the color of vertical separator line |
| thickness | Number | In Pixels | Thickness in pixels of the vertical separator line. |
| alpha | Number | 0 - 100 | Alpha of the vertical separator line. |
| dashed | True/False | 0/1 | Whether the vertical separator line should be rendered as dashed lines. Default value: 0 (vertical separator line rendered using straight lines) |
| dashLen | Number | In pixels | Sets the width of each dash when vertical separator line is rendered as dashed lines. |
| dashGap | Number | In pixels | Sets the gap between consecutive dashes when vertical separator line is rendered as dashed lines. |
| label | Text | Label for the vertical separator line, if to be shown. Note: The `label` attribute replaces the `name` attribute. Previously, either one of the attributes could be used to set the label. Support for the `name` attribute has been discontinued since v3.10.0. |
|
| showLabelBorder | True/False | 0/1 | Whether to show a border around the vLine label. |
| linePosition | Number | 0-1 | Helps configure the position of vertical line i.e., if a vLine is to be plotted between 2 points Jan and Feb, user can set any position between 0 and 1 to indicate the relative position of vLine between these two points (0 means Jan and 1 means Feb). By default, it’s 0.5 to show in between the points. |
| labelPosition | Number | 0-1 | Helps configure the position of the vLine label by setting a relative position between 0 and 1. In vertical charts, 0 means top of canvas and 1 means bottom. In horizontal charts, 0 means left of canvas and 1 means right. |
| labelHAlign | Text | left, center, right | Horizontal anchor point for the alignment of vLine label. |
| labelVAlign | Text | top, middle, bottom | Vertical anchor point for the alignment of vLine label. |
The dataset Object
Each `dataset` object contains a series of data. For example, for a monthly sales comparison chart for two successive years, the first data-set would contain the data for first year and the next one for the second year. You can provide data-set level cosmetics so that all data within that data-set will be plotted in the same color/alpha/etc. Depending on the chart type, there are a number of attributes that you can define for each `dataset` object.
| Attribute | Type | Value | Description |
| seriesName | Text | Any | Lets you specify the series name for a particular dataset. For example, if you're plotting a chart to indicate monthly sales analysis for 2005 and 2006, the `seriesName` for the first dataset will be 2005 and that of the second will be 2006. The `seriesName` of a dataset is shown in legend. |
| color | Color | Hex Color Code | This attribute sets the color using which columns, lines, area of that dataset will be drawn |
| alpha | Text | 0 - 100 or Comma Separated List | This attribute sets the alpha (transparency) of the entire dataset. |
| showValues | True/False | 0/1 | Whether to show the values for this dataset. |
| includeInLegend | True/False | 0/1 | Whether to include the seriesName of this dataset in legend. |
| visible | True/False | 0/1 | Sets whether a dataset will be visible on the chart, when the chart is first loaded. This attribute overrides the `initiallyHidden` attribute. `Default Value` : 1 |
| hoverColor | Color | Hex Color Code | This attribute can set the hover color for data plots of a particular dataset. |
| hoverAlpha | Number | 0 - 100 | This attribute sets the transparency for data plots of a particular dataset when hovered. |
| borderHoverColor | Color | Hex Color Code | This attribute sets the border color for data plots of a particular dataset on hover. |
| borderHoverAlpha | Number | 0 - 100 | This attribute sets the border's transparency for data plots of a particular dataset on hover. |
| borderHoverThickness | Number | In pixels | This attribute sets the thickness for data plot's border of a particular dataset on hover. |
The data Object
Attributes of the `data` object, child of the `dataset` object, are used to define the values to be plotted for individual data series. The `dataset` and `data` objects defined for one data series are shown in the example below:
"dataset": [{
"seriesname": "Previous Year",
"data": [{
"value": "10000",
},
{
"value": "11500",
},
{
"value": "12500",
},
{
"value": "15000"
}]
}]
| Attribute | Type | Value | Description |
| showValue | True/False | 0/1 | You can individually opt to show/hide values of individual data items using this attribute. This value over-rides the dataset level value. |
| alpha | Number | 0 - 100 | For stacked charts, you can define the alpha of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its alpha at "set" level using this attribute. |
| value | Number | Any | Numerical value for the data item. This value will be plotted on the chart. |
| displayValue | Text | If instead of the numerical value of this data, you wish to display a custom string value, you can specify the same here. Examples are annotation for a data item etc. | |
| toolText | Text | Any | By default, Exago shows the series name, category name, and value as tool tip text for that data item. But, if you want to display more information for the data item as tool tip, you can use this attribute to specify the same. |
| color | Color | Hex Color Code | For stacked charts, you can define the color of datasets at dataset level. However, if you wish to highlight a particular data element, you can specify its color at "set" level using this attribute. |
| link | Text | Any | You can define links for individual data items. That enables the end user to click on data items (columns, lines, bars etc.) and drill down to other pages. To define the link for data items, use the link attribute. You can define links that open in same window, new window, pop-up window or frames. Please see "Drill-Down > Using JavaScript Functions as Links" for more information. Also, you'll need to Url Encode all the special characters (like ? and &) present in the link. |
| hoverColor | Color | Hex Color Code | This attribute can set the hover color for a particular data plot. |
| hoverAlpha | Number | 0 - 100 | This attribute sets the transparency for a particular data plot when hovered. |
| borderHoverColor | Color | Hex Color Code | This attribute sets the border color of a particular data plot on hover. |
| borderHoverAlpha | Number | 0 - 100 | This attribute sets the border's transparency for a particular data plot on hover. |
| borderHoverThickness | Number | In pixels | This attribute sets the thickness for a data plot's border on hover. |
Trend-lines
Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. The `lines` object, child of the `trendlines` object is used to add trend-lines to a chart. Although the `line` object has to be defined within the `trendlines` object, the latter cannot be used to collectively customize trend-lines, because it does not have any attributes of its own. The attributes of the `lines` object, child of the `trendlines` object, are used to create and customize trend-lines for charts.
| Attribute | Type | Value | Description |
| startValue | Number | Numeric Value | The starting value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the `startValue` will be 102. |
| endValue | Number | Numeric Value | The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the `endValue` will be 109. If you do not specify a value for `endValue`, it will automatically assume the same value as `startValue`. |
| displayValue | Text | Any | If you want to display a string caption for the trend line by its side, you can use this attribute. Example: `displayValue='Last Month High'`. When you don't supply this attribute, it automatically takes the value of `startValue`. |
| color | Text | Hex Color Code | Color of the trend line and its associated text |
| isTrendZone | True/False | 0/1 | Whether the trend will be displayed as a line or a zone (fill-colored rectangle). |
| thickness | Number | In Pixels | If you've opted to show the trend as a line, this attribute lets you define the thickness of trend line. |
| alpha | Number | 0 - 100 | Alpha of the trend line. |
| dashed | True/False | 0/1 | Whether the trendline should be rendered as dashed lines. Default value: 0 (trendline rendered using straight lines) |
| dashLen | Number | In pixels | Sets the width of each dash when trendline is rendered as dashed lines. |
| dashGap | Number | In pixels | Sets the gap between consecutive dashes when trendline is rendered as dashed lines. |
| toolText | Text | Custom tool-text for this trendline/zone. |
Trend-lines (Chart level attributes)
Trend-lines are horizontal lines that aid in interpretation of data with respect to some pre-determined value. For example, if you are plotting the sales data for the current year, you might want to show the previous year's average monthly sales as a trend indicator for ease of comparison. Cosmetics for all the trend-lines rendered can be attained using this set of attributes. Although there are set of attributes of the `line object`, used to create and customize trend-lines, these set of attributes effect all the trend-lines rendered in your chart.
| Attribute | Type | Value | Description |
| trendlineColor | Color | Hex Color Code | Sets color of all the trend lines and its associated text in the chart. |
| trendlineThickness | Number | In Pixels | If you've opted to show the trend as a line, this attribute lets you define the thickness of all the trend lines in your chart. |
| trendlineAlpha | Number | 0 - 100 | Sets transparency for all the trend lines in your charts. |
Trend-lines Display Value Cosmetics
These attributes let you customize the text displayed with a trend-line.
Note: These attributes belong to the `chart` object and not to the `line` object (child of the `trendline` object). They are, therefore, applied to all trend-lines on your chart.
| Attribute | Type | Value | Description |
| trendValueFont | Text | Font Name | Sets the font family for the trend-line display value. |
| trendValueFontSize | Number | Sets the font size for the trend-line display value. | |
| trendValueFontBold | True/False | 0/1 | Sets whether the trend-line display value will be bold formatted. Default value: 0 (not bold formatted) |
| trendValueFontItalic | True/False | 0/1 | Sets whether the trend-line display value will be italicized. Default value: 0 (not italicized) |
| trendValueBgColor | Color | Hex Color Code | Sets the background color for the trend-line display value. |
| trendValueBorderColor | Color | Hex Color Code | Sets the border color for the trend-line display value. |
| trendValueAlpha | Number | 0 - 100 | Sets the transparency for the trend-line display value. Default value: 100 |
| trendValueBgAlpha | Number | 0 - 100 | Sets the transparency for the background of the trend-line display value. Default value: 100 |
| trendValueBorderAlpha | Number | 0 - 100 | Sets the transparency for the border around the trend-line display value. Default value: 100 |
| trendValueBorderPadding | Number | In pixels | Sets padding for the border around the trend-line display value. |
| trendValueBorderRadius | Number | In pixels | Sets the radius for the border around the trend-line display value. |
| trendValueBorderThickness | Number | In pixels | Sets the thickness for the border around the trend-line display value. |
| trendValueBorderDashed | True/False | 0/1 | Whether the border around the trend-line display value should be rendered as dashed lines. Default value: 0 (border rendered using straight lines) |
| trendValueBorderDashLen | Number | In pixels | Sets the length of each dash when the border around the trend-line display value is rendered as dashed lines. |
| trendValueBorderDashGap | Number | In pixels | Sets the gap between two consecutive dashes when the border around the trend-line display value is rendered as dashed lines. |